.jpg?imageView2/1/format/webp)
Dust Suppression Spray Cannon
30m Spray Cannon TDM-M03 has strong wind and a long range.
The working principle of 30m Spray Cannon is to use a high-pressure water pump to supply water. The water is sent to the sprinkler head of the sprayer through the water pipe. The pressure generated by the water pump generates a large particle fog through the specially designed sprinkler head. Then the fan is driven by a high-speed motor to produce a high-speed flow of air, and the water mist is sent out. Then the Bernoulli principle is used at the outlet, that is, in the same fluid, the flow rate is large, the pressure is small; Flow rate is small, pressure is strong. The larger particles of water mist through the high-speed air flow, further tear into smaller and lighter water mist, and transport out.
Due to the small particles of water mist, the 30m Spray Cannon can quickly contact and adsorb the dust and blowing dust, forming a moist mist, which can quickly suppress the dust and sink. It can completely inhibit the dust below 200 microns and achieve the purpose of reducing dust and removing haze.
| Spray range | 30m |
| Total power | 8.2kw |
| Water consumption | 3.2m³/h |
| L*W*H | 1555*1098*1699mm |
| Weight | 540kg |
| Control Method | Electric control (no PLC) |
| IP Grade | IP55 |
| Noise Level | 70dB at 7.5m |
| Turning degree | Left:180/Right:180 |
| Pitching degree | Up:50/Down:-10 |
| Diameter of water mist particle | 20-150µm |
| Fan power | 5.5kw |
| Water pump power | 2.2kw |
| Water pump pressure | 1-1.5Mpa |
| Usage temperature(℃) | 0-50 |
| Power supply | AC/3-phase/380V/50HZ |
| Nozzles quantity | 39pcs |
| Generator set | 10KW |
Copyright © 2023 Shandong Huali Electromechanical Co., Ltd
Terms & Conditions · Privacy Policy
.jpg)
